#Printers that use hp 02 ink how to
#Printers that use hp 02 ink install
#Printers that use hp 02 ink driver
#Printers that use hp 02 ink manual

One of the more common HP error codes, this code indicates the toner cartridge is either running low or out of toner.

#Printers that use hp 02 ink install

Reinstalling the cartridge usually resolves this error code, otherwise attempt a printer reset with the cartridge removed then install it again once the printer is back on. There is either no cartridge installed or the printer doesnвЂ™t recognise the cartridge that is installed. Do not use hard or sharp tools to remove the paper as it may cause damage to the printer. Go through all the access points on the printer to locate and extract the paper. If you have an older model HP printer, youвЂ™ll have to look for the jam yourself, a jam can occur in one of four stages of print these are: pick up, fusing, printing and exit. If this code appears you have a paper jam, newer models of HP printers will tell you where the jam is located so you can just follow the instructions on the screen to resolve the error code. If error code continues to display you may have a hardware fault. To solve this error code make sure toner cartridges are installed and all overs are closed. If the toner cartridge in your printer is correctly installed, this could indicate the either the cover is open or the PS5 sensors or cooling fans may be defective. If the error code is still displaying check and make sure the paper senor or optical-sensor is clean and not damaged. Make sure the printer is on a flat surface and clean up any toner build up. If the paper tray isnвЂ™t empty there might be a problem with the paper sensor or tray. 11 - Paper OutДЄn easy error code to resolve, the printerвЂ™s paper tray is empty, open it up and refill with paper. All returning customers get 10% off compatible HP ink cartridges. Try reinstalling the printer cartridge and if the problem persists it could be a hardware fault.ДЇor buying all your HP ink cartridges and toner cartridges make sure you buy from. Turn off the printer and take out the power cable for 30 seconds, remove the printer cable and turn it back on. The printer is having difficulty with a toner cartridge chip in that it's unable to read it. This could be due to it being dislodged, scratched or not installed in the printer correctly. Your printer has a problem with the printer cartridge chip, which it's having trouble reading. If this doesnвЂ™t fix the issue there may be a hardware problem.

Turn the printer off and on then this error message should disappear.

#Printers that use hp 02 ink driver

This HP printer problem is commonly associated with driver or printer cable problems.

#Printers that use hp 02 ink manual

Also check your printer manual for further information. If the reset doesnвЂ™t work then have a look through the HP error codes below to find a problem and solution.

Wait until the printer is silent and see if this has cleared the error message. Plug the power cable back into the plug socket and reconnect the power cable to the back of the printer.

Remove the power cord from the plug socket. Whilst the printer is on, unplug the power cable from the back of the printer. Wait until the printer is in stationery mode before you continue. Turn the printer on (unless it is already switched on). In most cases a simple printer cable with reset will clear the HP error message by following these simple steps:

#Printers that use hp 02 ink how to

How to Clear HP Error Codes on Your Printer The printer will display a message on either the printer or on the computer.ДЇind the common HP error codes to help you get the right issue to fix your printer with an error code. HP error codes are common when your printer has a fault or is not working.